 |
SPiiPlus UDMnt SPiiPlus UDMnt (Universal Drive Module) is offered as one and two axis drive for AC Servo motors, DC brush motors, two, three and five phase step motors operating also in close loop. It operates with motor voltage up to 60Vdc and with 5A or 10A peak motor phase current. |
 |
SPiiPlus SDMntThe SPiiPlus SDMnt (network Stepper Drive Module) line of four and eight axis open loop step motor drives modules are designed to address the needs of industrial machines for economical and simple multi-axis motion control solutions. Each unit includes one 36Vdc/3A bipolar drive. All other are 36Vdc/3A unipolar drives. The current level and the micro-step resolution are individually programmable for each drive. The SPiiPlus SDMnt includes two sets of Pulse/Direction inputs and two sets of Pulse/Direction outputs for Master-Slave operation. In addition, there are 6 general purpose inputs and 6 general purpose outputs. |
 |
SPiiPlus PDMntThe SPiiPlus PDMnt (network Pulse/Direction Module) provides the ability to add up to four step motor and servo motor drives with Pulse/Dir interface to an EtherCAT network using any of ACS’ EtherCAT masters. Each of the drive interfaces consists of Pulse/Dir, limit switches, enable and fault feedback. The maximum pulse rate is 4MHz. The module can also be used by a SPiiPlus EtherCAT master to control Laser generators with a dynamically programmable pulse rates. |
 |
SPiiPlus IOMnt-32-32The SPiiPlus IOMnt-32-32 (Network Inputs and Outputs Module) is an EtherCAT digital I/O module with 32 inputs and 32 outputs. The input voltage is 24Vdc |
