Careers
Knowledge Center

Drives

Products
Ask our Experts

MC4Udc
2 to 8 drives, wide power range

The SPiiPlusNT (NT - Network Controller) is designed for incorporation in the MC4U. Once plugged into an MC4U, the MC4U becomes alsoan EtherCAT master designated MC4Unt. It manages the EtherCAT network with up to 32 axes of motion and countless number of I/Os andsensor ...

UDMpm
1, 2 drives, 85-265V, up to 7.5/15A

The UDMPM is a line of EtherCAT universal single & dual axis economical drives for AC servo / DC Brushless, AC Induction, and DC brush motors....

UDMhp/ba
1 to 3 drives, 85-265Vac, up to 15/30A

The UDMHP/BA is a state of the art series of EtherCAT drive modules with threebuilt-in universal drives. It addresses the needs of modern machinery for botheconomical and for high performance, scalable and distributed control for motioncentric applications....

UDMhv
1 or 2 drives, 230-480Vac, up to 15/30A or 230Vac 20/60A

The UDMHV is a line of EtherCAT universal single & dual axis economical drives for AC servo / DC Brushless, AC Induction, and DC brush motors. The UDMHV operates as an EtherCAT node under any SPiiPlus EtherCAT master Controller including the PC based SPiiPlusSC Soft Con...

UDMpc
1, 2 drives, 24-48V, up to 10/20A

The UDMPC is a line of EtherCAT universal single and dual axis drives for AC servo /DC Brushless, DC brush, two phase and five phase stepmotors. The module is designed to be mounted on a carrier board....

UDMnt
1, 2 drives, 12-80V, up to 10/20A

The UDMNT is a line of compact, panel-mounted EtherCAT modules with single / dual axis universal drives for servo, stepper, and voice-coilmotors with peak power of up to 1.3kW....

UDMmc
2, 4 Axis Drive Module, 80V, Up to 20/40A

The UDMMC is a line of compact EtherCAT modules of two and four universal drives with rating of 12 to 80Vdc and 2.5A(5A peak) to 20A (40A peak) per drive. Each drive is programmable to control a 3 & 2 phase servo motor, a DC brushmotor, a voice coil motor and a 2 & 3 ph...

UDMlc
2, 4 drives, 12-48V, up to 5/10A

The UDMLC is a series of small footprint EtherCAT modules with dual/quad-axis universal drives for servo, stepper, and voice coil motors with apower range of 10W to 200W. The type of motor is selected by the userand can be set differently for each drive....

UDMsd
2,4 drives, 12-48V, up to 2.5/5A

The UDMSD is a series of compact EtherCAT modules with dual/quad-axis universal drives for servo, step, and voice coilmotors with a continuous power range of 10W to 100W (200W peak). The type of motor is selected by the user and can beset differently for each drive....

SDMnt
4, 8 unipolar stepper motor drives, 40V, 3A

The SDMNT line of multi-axis open loop step motor drives modules are specifically designed to addressthe needs for economical solutions for machines with many open loop step motors operating as partof an EtherCAT network. It is fully supported by any of ACS’ EtherCAT ma...

UDMpa

The UDMPA is a line of economical and compact EtherCAT drive modules....

UDMcb

The UDMCB is a line of economical and compact PCB mounted EtherCAT drive modules....

NPMpm
1,2 drives, 12-100V, up to 13.3/40A

The NPMpm is a line of the most advanced servo drives available today.It is specifically designed to address the most demanding applications with regards to move and settle times, standstilljitter, and velocity smoothness, such as wafer metrology and inspection, FPD ins...

NPApc
1,2 drives, 12-100V, up to 13.3/40A

The NPDpm is a line of the most advanced PWM servo drives available today.It is specifically designed to address the most demanding applications with regards to move and settle times, standstill jitter, and velocity smoothness, such as wafer metrology and inspection, FP...

NPApm
1,2 drives, 12-100V, up to 13.3/40A

The NPDpm is a line of the most advanced PWM servo drives available today.It is specifically designed to address the most demanding applications with regards to move and settle times, standstill jitter, and velocity smoothness, such as wafer metrology and inspection, FP...

NPArm
2 to 8 NanoPWM Motor Drives System with ±10V Current Commands

The NPARM is an integrated servo motor drive system that is designed to operate with any motion controller with ±10V current commutation commands interface. It includes 2 to 8 drives that enable achieving motion performance that exceeds the performance achievable with l...
Ask our Experts